无限梦幻 - 全球顶级原创技术中文论坛

 找回密码
 立刻入伙
搜索
查看: 196|回复: 2

[海思系列] 华为EC2108打印信息

[复制链接]
发表于 2018-3-23 16:12:42 | 显示全部楼层 |阅读模式


fastboot3.0-svn (Nov 02 2011 - 17:02:18)

ETH FastBoot:  V3.0
Machine ID:    8000 v0
Build Date:    Nov  2 2011, 15:01:08

Serial Number: godbox

DRAM:  256 MiB
NAND:  Special Nand id table Version 1.23
Nand ID: 0x2C 0xDA 0x90 0x95 0x06 0x00 0x00 0x00
Nand(Hardware): Block:128KB Page:2KB Chip:256MB*1 OOB:64B ECC:1bit
256 MiB
Can't find a valid spi flash chip.
*** Warning - bad CRC or NAND, using default environment

In:    serial
Out:   serial
Err:   serial
-----------------GPIO5_4=0x0----------------------
-----------------GPIO5_DIR=0x3c----------------------
-----------------GPIO5_4_DATA=0x0----------------------
use partition in flash
m_nValidPartNum=14
m_cmdline_part: 1M(fastboot),1M(partition),6M(boot1),64M(app),1M(logo1),1M(param1),1M(playlist),6M(boot2),64M(app2),1M(logo2),1M(param2),1M(playlist2),108M(swfs),256M@0M(whole)
partition name :app
app_base :800000
part_base:800000
fs_type=<NULL>
app:FS_TYPE_YAFFS
partition name :app2
app_base :5100000
part_base:5100000
fs_type=<NULL>
app2:FS_TYPE_YAFFS
sw_boot_select->547 param1_base:4900000
m_kernel=boot1
find kernel offset:200000
find kernel size:600000
find logo1 offset:4800000
find logo1 size:100000
m_cmdline_boot: root=/dev/mtdblock3 rootfstype=yaffs2 rw
Customer_GetBootArges->876g_cmdline len : 296

=====================
bootargs=mem=156M console=ttyAMA0,115200  root=/dev/mtdblock3 rootfstype=yaffs2 rw  mmz=ddr,0,0x89c00000,100M LogBufSize=0x80000 mtdparts=hinand:1M(fastboot),1M(partition),6M(boot1),64M(app),1M(logo1),1M(param1),1M(playlist),6M(boot2),64M(app2),1M(logo2),1M(param2),1M(playlist2),108M(swfs),256M@0M(whole)

=====================
do fastplay!!!CMPI_MEM_Init mem = 156M
###############strlogaddr:4800000
swlogaddr:4800000
logoaddr:4800000
swlogsize:100000
logosize:100000
LogoAddr:0x4800000, LogoSize(Adjust):0x100000
1.LogoAddr:4800000
2.LogoAddr:4800000
3.LogoAddr:4800000
3.ret:0
5.ret:0
read logo Content ok
get_fastPlay_logoMemInfo,984: para_hdr->logoMtdSize = 122880
!!! logo flag is false.(not open)
find param1 offset:4900000
find param1 size:100000
Fmt =6
++unsupport layerformat 0 .use default pixelformat 9
invalid InRect,inrectwidth 0 inrectheight 0
use default inrectwidth 1280 inrectheight 720
g_gfxMode: WBC Mode
JPG_Decode(): Line 738 : Hard dec
ChipType:0,ChipVersion:512
Loader_Main->1007, get bootarges mem=156M console=ttyAMA0,115200  root=/dev/mtdblock3 rootfstype=yaffs2 rw  mmz=ddr,0,0x89c00000,100M LogBufSize=0x80000 mtdparts=hinand:1M(fastboot),1M(partition),6M(boot1),64M(app),1M(logo1),1M(param1),1M(playlist),6M(boot2),64M(app2),1M(logo2),1M(param2),1M(playlist2),108M(swfs),256M@0M(whole)
read stb info error, use ramdon MAC!
setenv bootm :mw.l 0x10203148 0x2;mw.l 0x1020314c 0x2;mw.l 0x101f50fc 0x0;bootm 0x82000000
Press Ctrl+C to stop autoboot
## Booting kernel from Legacy Image at 82000000 ...
   Image Name:   Linux-2.6.35.7_hi3716m
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2696380 Bytes = 2.6 MiB
   Load Address: 80800000
   Entry Point:  80800000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Linux version 2.6.35.7_hi3716m (lijulong@lijulong-ThinkPad-SL410) (gcc version 4.4.1 (Hisilicon_v200(gcc4.4-290+glibc-2.11+eabi+nptl)) ) #43 Mon Aug 15 19:37:57 CST 2011
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: godbox
Memory policy: ECC disabled, Data cache writeback
godbox bus clk is 400000000
l2cache_flush_all:l2cache_flag = 0,L2 cache may not enable!
l2cache_flush_range:l2cache_flag = 0,L2 cache may not enable!
l2cache_flush_range:l2cache_flag = 0,L2 cache may not enable!
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 39624
Kernel command line: mem=156M console=ttyAMA0,115200  root=/dev/mtdblock3 rootfstype=yaffs2 rw  mmz=ddr,0,0x89c00000,100M LogBufSize=0x80000 mtdparts=hinand:1M(fastboot),1M(partition),6M(boot1),64M(app),1M(logo1),1M(param1),1M(playlist),6M(boot2),64M(app2),1M(logo2),1M(param2),1M(playlist2),108M(swfs),256M@0M(whole)
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 156MB = 156MB total
Memory: 153200k/153200k available, 6544k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
    vmalloc : 0xca000000 - 0xfe000000   ( 832 MB)
    lowmem  : 0xc0000000 - 0xc9c00000   ( 156 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .init : 0xc0008000 - 0xc0022000   ( 104 kB)
      .text : 0xc0022000 - 0xc0490000   (4536 kB)
      .data : 0xc04ac000 - 0xc04d62e0   ( 169 kB)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
发表于 2018-3-23 16:24:49 | 显示全部楼层
发表于 2018-3-23 16:37:34 | 显示全部楼层
*滑动验证:
您需要登录后才可以回帖 登录 | 立刻入伙

本版积分规则

www.freedmx.net

GMT+8, 2018-9-26 03:14 , Processed in 0.063136 second(s), 18 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回复 返回顶部 返回列表